Yatai lc fiber connector is designed using sophisticated tools & equipment with the help of our team of talented craftsmen. 2.
The optimum performance makes it a distinguished product. 3.
It would be a great choice for many sportsmen to use it to eliminate the stiffness of the muscles after exercise. 4.
The product is able to help improve the architectural appearances while improving the safety and durability of the buildings to provide a comfortable staying space. Company Features1.
Yantai Yatai Photoelectricity Equipment CO.,LTD overtakes many competitors in the field of producing fiber cable . 2.
Yantai Yatai Photoelectricity Equipment CO.,LTD is famous for producing the world's top enterprise product. 3.
The goal of our company is to become an innovative and distinctive manufacturing company. We will invest more in introducing advanced and high-tech manufacturing and developing facilities which can help us to broaden our product range. We have a unique set of strategic objectives. At this moment, we will upgrade customers services level and find more approach to cater to customers' needs or improve customers' satisfaction. In so doing, we hope to expand the business scope.
1. Laser is harmful, so especially, you must protect your eyes. When the LD working, please do not exposure eyes to laser.
2. Generally, the higher temperature, the shorter life of the LD. Avoiding high temperature when you use it.
3. The head of fiber must be cleared up while the LED operates.
4. When using it to test the connector, please notice to push or Pull it lightly.
5. Please screw on the dust cap in case that the dust fall into after working.
6. Take out the batteries when you don't use it.
7. Except the dust cap and the Rear cover, don't disassemble or twist other parts Privately, otherwise, We will be not answer for it.
Screw off the tail, then put batteries into the tail,(Caution: cathode of the batteries point to bottom of the indicator, anode of batteries contact anode of the indicator).
Connect the body with the tail, and open dust cap, then press the switch. You will see the red laser emitting from the optical interface, at the same time, LED will be lighted up (Please don's stare at the beam, for fear of damaging your eyes)
Press the switch again, light-emitting changes to pulse mode, and the LED synchronize with light-emitting (pulse frequency will be controlled at 2-3Hz or 9Hz)
Press the switch again, the optical source will shut, and there is no more light. Meanwhile, LED put out (switching cycle mode is: continuous-pulse-shut)
Insert the fiber which you want to inspect into optical interface, then press the switch to choose working mode of the light source (continuous or pulse).
When finish the working, please screw on the dust cap. If you don't use the indicator for a long time, you must take out the batteries, in case that batteries rot and destroy light source.