Yantai Yatai Photoelectricity Equipment Co., Ltd.



The illustration shows some of the important features

by:Yatai     2020-06-23
Endecotts woven wire mesh sieves are the most widely used test sieves for all types of laboratory sampling and particle size analysis. They are made with only the highest quality materials and are available in diameter sizes of 38,100, 150, 200, 250, 300, 315, 350 400, and 450 mm or in 3, 8, 12 or 18 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 microns in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel. Perforated Plate Sieves Endecotts manufacture a wide range of perforated plate sieves for the many industries that require them. These are available in diameter sizes of 200, 300, 315, 350, 400 and 450 mm.Aperture sizes range from 125 mm to 4 mm in square hole and 125 mm to 1 mm in round hole.Perforated plate sieves can be supplied in frame materials of brass or stainless steel and are all manufactured to the highest engineering standards to ensure quality and accuracy. Woven wire sieves and perforated plate sieves are available to every national and international standard. Other materials and sizes can be produced to order. Used to determine the flakiness index of aggregates. Endecotts grid sieves are manufactured to fully conform to the requirements of EN 933-3:1997. The 300 x 300 mm sieves are made entirely of stainless steel and are strong, durable and anti-corrosive. The Grid sieve can be supplied as a single item or as a set of 13 sieves. A receiving pan is also available on request.The low cost M100 is an excellent small laboratory shaker designed for 100 mm and 3 inch diameter sieves. It is robust, lightweight and provides the user with complete control over amplitude and vibration time. Common with all Endecotts shakers the M100 imparts the optimum vibration movement to the sieves to ensure rapid and accurate results.Fitted with an electromagnetic drive - the shaker is not only maintenance free but has no rotating parts to wear out. Another advantage of this type of drive is 'quiet operation'.Simply load the sieve stack, clamp into place. Set the 0 to 60 minute timer or select 'I' for continuous sieving. Set the amplitude setting to the optimum level for the sample under test. The M100 will accommodate up to three 100 mm, 3 or 4 inches diameter sieves plus a lid and receiver. The Minor M200 has been designed and manufactured to combine low cost with the benefits of a well designed and engineered shaker incorporating many features usually found only on larger more expensive models. It is ideal for the laboratory or plant since it is compact and genuinely portable (weighing only 17kg). There are no rotating parts in the Minor M200 consequently it is quiet in operation and maintenance free. The sieve stack is held firmly in position between the location and clamp plates by poly fibre straps, these allow the whole unit to be packed away in a space less than 200 mm high. Simply set the 0 to 60 minute timer for a timed operation or select 'I' for continuous sieving.The vibrating action imparts a precise movement to the sieve stack ensuring efficient sieving and excellent repeatability.the EFL has been specially designed to operate with heavy samples without the loss of performance. It is equipped with a dynamic power source that ensures the right vibration is imparted to the sample for fast, accurate and reproducible tests.
Custom message