Yantai Yatai Photoelectricity Equipment Co., Ltd.



Not a few of the guitarists who question why there

by:Yatai     2020-05-20
Basically this is done by the manufacturer of guitars based on guitar and pick up a how to use the amplifier. Amplifier designers are very aware that not all guitar have the same output. Most regular guitar was made with the output that is not too large. Therefore, when he connected to guitar amplifier, should need little additions to further enhance the signal to be processed by the amplifier. In the input labeled 'hi-output' amplifier generally do gain of 6dB It is different when we used guitar that already has a large output or better. For example, the guitar which is equipped with an active circuit in their electronic circuit, or like most guitar that uses active pickups. A typical guitar like this when connected to the input terminal labeled hi-output, it is very likely there will be surplus output which resulting guitar sound tends to distort. Although the setting is clean. It all depends on your taste and the type of music. The following is a guide on how do we use the correct input of the amplifier. ACTIVE PICKUPS WITH HI-GAIN Absolutely nothing that prohibits you to use this. Although it is not recommended. However, if indeed in dire need of extra output with a full distinctive sound distortion, it never hurts to experiment. However, the risk of sound produced tends to distort and less natural. Especially if it turns out the clean sound is also still expected in your guitar playing. As well as if your guitar pickups were low output, then connect it to the amplifier via a low gain. USE BOTH AS THE SAME INPUTS (HI-GAIN AND LOW-GAIN) This is also not a problem. When making these amplifiers, usually the designer would have to consider this. They provided two inputs at once, so the user can also use it. To play a duet with an amplifier, for example, or using these facilities as an input to the CD player when learning a song. No problem. When using it for two guitars at once, you should be aware that it is impossible to do the settings through the amplifier, except indeed if each guitar using effects device that allows to reduce or increase the level so that both guitars are on the same level, or not too much different. So Hi-gain or low-gain inputs is not a big problem that will hinder your game (or enhance your career). However, it will be very good if a guitarist know everything associated with his instrument, a guitarist can't sleep in peace if still not aware of any writings that are in the equipment. You will see this hi-gain and low-gain every time you connect the guitar to the amplifier. Surely there's always the question, 'Where will i put my jack on?'. (please visit my blog for more tips)
Custom message