Yantai Yatai Photoelectricity Equipment Co., Ltd.



How to Save Money on Home Energy

by:Yatai     2019-12-13
Replace the water heater to consider the water pipe at home.
Did you know that 20% of typical household energy bills are used to heat water?
You should keep this in mind as you seek to save energy and curb spending.
Tourists from Europe and other overseas regions often encounter walls in hotel rooms --
Their owner informed them that the hanging water tank was an instant water heater.
The tank contains a burner or heating element for heating the water flowing through the device. Open a hot-
Open the faucet, burner or heating element;
Turn off the faucet, turn off the burner or element, and stop the water heating.
No tank water heater is energy-
Works to a large extent because they have little \"spare\" heat loss inherent to standard tanksor \"storage-
\"The type of water heater in this country.
Within a few hours between use, 40-or 50-
The gallon\'s traditional water heater tank is eventually transferred to the surrounding air, and the burner or heating element is activated to keep the amount of water in the tank hot.
Spare heat loss also helps cooling load of air
Air conditioning system in summer.
Another benefit of using a tank-free water heater is that you will never run out of hot water, although it has nothing to do with energy saving or efficiency.
You can take one bath after another, and you never have to wait for the water in the tank to heat to the point where it can be tolerated.
Newer models of tank-free heaters contain variables-
The capacity burner automatically adjusts the combustion according to the volume and temperature of the water passing through the heat exchanger, thus increasing the heating efficiency and the output temperature.
The ignition is provided by the ignition device, eliminating the energy loss caused by the standing indicator light.
The tank-free water heater burner is also more effective than the storage water heater burner.
The manufacturer continues to improve the mechanical structure of the tank-free water heater.
Now they can buy it in the pipeline supply room, lumberyards and home center in the US.
The following are some aspects that need to be considered before buying a water tank-free water heater. What size?
: Installing a water tank-free water heater at home is more complicated than people think.
You can\'t simply replace a standard tank
No tank water heater.
A key issue is to adjust the size of the new device correctly.
The rated power of the tank-free water heater is determined by its ability to increase the water temperature entering the unit at a certain flow rate.
One complaint from some people about these devices is that if they don\'t fit in size, they can\'t provide enough water at the same time to meet multiple uses.
These two problems are usually due to the insufficient size of the unit and cannot meet the intended use.
Another complaint is that when multiple people in a house try to use hot water at the same time, no one gets enough hot water.
Low water volume: suppose you live in Michigan and it\'s winter now and the water entering your home is 38 degrees cold.
It takes a lot of energy to heat the water to about 120 degrees available.
In order to ensure that the water is heated to the correct temperature, the tank-free water heater may have to slow the flow rate through the heat exchanger.
This may lead to lowerthan-
Expected volume of hot water-
Tap or shower.
Or, in the same geographical and climatic conditions, if two people in the House want to use hot water at the same time, the two users may have to share the hot water coming out of the water heater-
It is also unlikely to be satisfied with the money they get.
The key to avoiding these problems is to buy a tank-free water heater with enough capacity to deal with any situation-
Or accept and solve some of the limitations of the smaller model.
Other effects of no tank: a strange thing about no tank water heater is that in order to activate the switch to open the burner, they need a certain flow rate through the device.
Unless you use half a gallon of water per minute, the burner will not catch fire and there will be no hot water.
No tank heater also need 5-
Heat the water to the required temperature for 15 seconds.
In large homes that already have a long wait for hot water, the extra time it takes to reach the user seems endless, and it also wastes water.
On the good side, the size of many tank-free water heaters is only the size of a large suitcase, and they are designed to hang on the wall.
This will free up valuable ground space.
Installation issues: if you decide to study further the installation of a tank-free water heater, please note that you may have to deal with some gas piping, plumbing and electrical issues. The gas units (
The type with the highest capacity and therefore the most popular type)
The flue is required to discharge the combustion
Products generated by burner ignition.
Because the burners on the tank-free water heater require a lot of gas, they need a larger-than-
Safe discharge of ordinary flue of combustion gas.
So you can\'t usually simply replace a standard tank.
Type water heater with no tank water heater and expect to connect the flue to chimney, on chimney, old water
The heater flue that used to go.
New models of tank-free water heaters, such as sealed combustion furnaces, can drain the side walls through plastic PVC pipes, thus eliminating the need to upgrade existing pipes.
However, if an old tank
The type water heater shares the flue with the furnace and removes the old flue pipe in order to install the side wall
Ventilation tank-free water heaters may mean that the furnace flue must be reduced in order to safely handle the furnaceOnly smoke.
It gets complicated, which is why installing a tank-free water heater while benefiting from energy
In most cases, the view of efficiency needs to be carefully considered, which may not be an ideal practice. it-
Your own project.
Since the burner capacity of the tank-free water heater is too large, in order to deliver the amount of gas required for the normal operation of the water heater, the gas pipeline may have to be replaced with a larger size.
Most tank-free water heaters require electricity to run, which means that a new socket may have to be added if a socket has not reached 6 feet of the planned installation.
Of course, reliance on electricity means that the water heater does not heat water when there is a power outage, although some of the latest models on the market are designed to operate without external power.
The heat exchanger inside the tank-free water heater needs to be hard-
In the water area, a mild acidic liquid is used, but the service life of the unit should be 20 years or more.
Finally, the initial cost of a tank-free water heater is usually several times the storage cost
Type of water heater.
Additional money is usually required for installation.
But if you\'re using a lot of hot water and can put up with some quirks of a tank-free water heater, then investing in one can save energy for a lifetime.
When you buy other appliances for your home, you can also consider energy efficiency.
In the next section, we will provide you with some tips on purchasing products such as economy refrigerators, dishwashers, etc.
Custom message